Heat Seal L Sealers create bags around products with centerfolded shrink film. They cut and seal shrink film to different sizes, depending on the L Sealer you are using, and are equipped with a film separator, film roller with twin perforating hole punchers, and film guide. These machines are easy to operate. The operator sets the seal time and heat and inserts the product between the two layers of center fold shrink film and presses down the sealing bar. The seal wire will seal the edge and cut off the film. Once the seal is done, the package is pulled away from the machine. Most of the L Sealers are equipped with conveyors which allow the sealed product to pass on to the shrink tunnel for shrinking process. L Sealers are ideal for quick and easy shrink packaging and are available in different sizes depending on the requirements.
Heat Seal L Sealers offer the perfect combination of quality and cost effectiveness. Perfect for a wide range of product sizes.
Heat Seal HDS1524
Heat Seal HS1620
Heat Seal HS2024
| Specifications | Heat Seal HDS1524 | Heat Seal HS1620 | Heat Seal HS2024 |
|---|---|---|---|
| Overall Dimensions | 72” Long x 35” Wide x 46”High | 49” Long x 23” Wide x 49” High | 59” Long x 29” Wide x 59” High |
| L Bar Seal Area | 15” Wide x 24” Long | 16” Wide x 20” Long | 20” Wide x 24” Long |
| Film Capacity | 24” Wide | 17" Wide | 22" Wide |
| Working Height | 36” | 35" | 35" |
| Power | 115 Volts/ 1 Phase/ 20 Amps | 115 Volts/ 1 Phase/ 15 Amps | 115 Volts/ 1 Phase/ 15 Amps |
| Weight | 350 lbs | 185 lbs | 218 lbs |
Heat Seal L Sealers Features
- Top Mounted, Easy Access Control Panel
- RS-5 Plus Digital Controller
- Impulse Wire Seal System
- Cast Aluminum Seal Head with Film Clamps
- Adjustable Film Roll Cradle with Brake
- Film Separator Rod
- Hot Knife Seal System
- Air Actuated Sealing Head
- Powered Film Unwind with Perforating Roller